opennic:setup:webminbind:debian9u0webmin1u9base

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
opennic:setup:webminbind:debian9u0webmin1u9base [2020-03-26T12:47:11Z]
fouroh-llc
opennic:setup:webminbind:debian9u0webmin1u9base [2020-03-27T11:44:12Z] (current)
fouroh-llc
Line 1: Line 1:
-===== Debian 9 with Webmin 1.9xx Fresh Install ===== +===== Fresh Install ===== 
-Again, please make sure you install from within Webmin (Un-used Modules) then Refresh Modules to move the BIND link under ServersThis is the default screen.+This page includes a very brief overview of Webmin module screens, before turning the instance into a Tier-2 service stackThe page is going to grow and expand as feedback comes in for better, more detailed explanationsIf you are already familiar with Webmin, or you do not wish to use it you may skip this page entirely. 
 {{:opennic:setup:webminbind:base-001.png|The newly installed Webmin BIND module}} {{:opennic:setup:webminbind:base-001.png|The newly installed Webmin BIND module}}
 In the upper left corner the icon that looks like a gear is the Module Config. In the upper right corner the icon looks like a "Play" button starts the service. When you configure RDC a "Refresh" button is added. Do not yet start it, but lets look at its home directory. In the upper left corner the icon that looks like a gear is the Module Config. In the upper right corner the icon looks like a "Play" button starts the service. When you configure RDC a "Refresh" button is added. Do not yet start it, but lets look at its home directory.
Line 7: Line 8:
 The location and the list of files might be different on a different distribution (Red-Hat, Slackware, or from Enterprises like Oracle). The location and the list of files might be different on a different distribution (Red-Hat, Slackware, or from Enterprises like Oracle).
  
-==== named.conf.default-zones ==== +==== Backup and Archive==== 
-The content of this file not supposed to be changed by handand a new BIND instance has it as +The difference between backup and archive is the location where they are stored - one is on-line, but going to be lost when the host is lost. The other is off-line, but remains available. These are your choices for backup: 
-<code> +  * A manual snapshot by Linodewhich you should use for milestones such as before distribution upgrades. 
-// prime the server with knowledge of the root servers +  * Three automated backups by Linode, which you should use to recover from errors or attacks. 
-zone "."+  * A compressed archive by Webmin, which you should use to save parts of the filesystem 
- type hint; +  * A download upload utility by Webmin, to keep off-line copies of your archives.
- file "/etc/bind/db.root"; +
-};+
  
-// be authoritative for the localhost forward and reverse zonesand for +Use the listed above to plan and test your capacity to recover from errorsattacks or even from ransomware. These are very basic, simple measures to keep your service stacks functional.
-// broadcast zones as per RFC 1912+
  
-zone "localhost" { +{{:opennic:setup:webminbind:base-010.png|Webmin Filesystem Backup with scheduling}
- type master; +Linode backups and restores never fail, but they replace your ENTIRE instance.
- file "/etc/bind/db.local"; +
-};+
  
-zone "127.in-addr.arpa" { +{{:opennic:setup:webminbind:base-003.png|Webmin Filesystem Backup with scheduling}} 
- type master; +Webmin allows scheduling and creating compressed archives of targeted part of your instance.
- file "/etc/bind/db.127"; +
-};+
  
-zone "0.in-addr.arpa" { +{{:opennic:setup:webminbind:base-004.png|Save and restore copies of your on-line backup}} 
- type master; +Recover from off-line backup in case of sustained attack going back for weeks or months.
- file "/etc/bind/db.0"; +
-};+
  
-zone "255.in-addr.arpa" { +==== User Management ==== 
- type master; +User management from the shell is expanded by Webmin several waysThe most advanced is Usermin via LDAP, which is not really necessary on single instances. However, using the Webmin Users and Groups modules is necessary to allow login via Webmin otherwise the user is limited to ssh login onlyAlso - on production servers Webmin shall not be installed to reduce the number of software exploits
- file "/etc/bind/db.255"; +
-}; +
-</code>+
  
-As you see, the db.root file is included here, and the rest of the file content has to do with proper networking setup on the host. Later while adding / removing name servers the two most common directives added by Webmin going to be "also-notify" and "allow-transfer".+{{:opennic:setup:webminbind:base-005.png|Extended functionally for UNIX Users and Groups by Webmin}} 
 +Webmin Users and Groups control access to Modules - but the UNIX user must also exist.
  
-==== named.conf ==== +==== Module Management ==== 
-This file should not be edited by hand, but edited by Webmin: +These should be the IP4 addresses of the OpenNIC Tier-2sNormally you use Google's 8.8.8.8 herebut if you enter only that this name-server is NOT going to functionAlso note - this is different from the settings of your VPS networkwhich SHOULD use Google's.
-<code> +
-// This is the primary configuration file for the BIND DNS server named. +
-// +
-// Please read /usr/share/doc/bind9/README.Debian.gz for information on the  +
-// structure of BIND configuration files in Debian*BEFORE* you customize  +
-// this configuration file. +
-// +
-// If you are just adding zonesplease do that in /etc/bind/named.conf.local+
  
-include "/etc/bind/named.conf.options"; +{{:opennic:setup:webminbind:base-006.png|The DNS Administrator login}} 
-include "/etc/bind/named.conf.local"; +The DNS administrator has full access to the DNS module and a few others like backup/restore and download/upload.
-include "/etc/bind/named.conf.default-zones"; +
-</code>+
  
-The file //named.conf.default-zones// includes //db.root//, and the file //named.conf.options// holds the BIND daemon's operating parameters.+==== Network Security ==== 
 +Debian does not assume anything about the purpose of the system, it does not install or configure additional software, and it does not start services by default. //iptables// is an exception to this, it is installed by defaultHoweverit is not configured and it is not startedIf you have installed a firewall software such as FirewallD - iptables is going to be started and managed by that software.
  
-The file //named.conf.local// going to hold our master and slave zones (called domains). Before we start up lets archive /etc/bind to save the original configuration.+{{:opennic:setup:webminbind:base-007.png|Firewall is not configured by default}} 
 +If you start iptables with a wrong configuration you might lose access to your instance!
  
-==== Backup and Archive==== +==== Webmin Modules ==== 
-The difference between backup and archive is the location where they are stored one is on-linebut going to be lost when the host is lostThe other is off-linebut remains available. Linode provides a manual snapshot and three automated backups which are rotated - for the entire VPS. Webmin provides manual and scheduled backup on select part of the file systemwhich you may also download / push off-line. The screenshot shows the Webmin //tar// and //cron// interface. +Some modules in Webmin are matured and well-rounded the BIND modulefor exampleSome are obsolete, no longer maintained, and these days they are only included for backwards compatibility - such as the Jabber IM ServerSome are mature and install from within Webmin, some needs to be installed from the shell and tell Webmin to look for them "Refresh Modules"
-{{:opennic:setup:webminbind:base-003.png|Webmin Filesystem Backup with scheduling}}+
  
-DNS is all about redundancy, so configuring email notification about backup - or any other status - is rather pointless. If your instance goes down for any reason it may stay down until you come around to visit and check on it (once a week, maybe). +{{:opennic:setup:webminbind:base-008.png|Module installation}} 
- +Webmin has good support for FirewallD - but it must be installed from the shell.
-==== Start BIND  ==== +
-Once you create and RESTORE the backup, and manage to download the tar file, replace the content in db.root as shown above. Then hit "play" on the upper right to start BIND. +
- +
-=== Setup RNDC === +
-This is going to fail if, for any reason, the loop-back interface (127.0.0.1) is blocked by the provider. There might be other reasons, but in most cases you are going to see a success message if you visit the same screen the second time. On the //DNS Keys// screen you should see the //rndc-key// as well. The file named.conf now contains the RNDC setup: +
-<code> +
-include "/etc/bind/named.conf.options"; +
-include "/etc/bind/named.conf.local"; +
-include "/etc/bind/named.conf.default-zones"; +
-key rndc-key { +
- algorithm hmac-md5; +
- secret "abcdefghifklmnopqrstuv=="; +
- }; +
-controls { +
- inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { rndc-key; }; +
- }; +
-</code> +
- +
-=== Zone Defaults === +
-This configures the default options for master zones, and some of the defaults should be set as shown: +
-{{:opennic:setup:webminbind:base-004.png|Default for Master Zones}} +
- +
-What is not shown depends on your installation. The screenshot shows the current host name which you should ignore. Instead enter the FQDN of your name server, NSx.YOURDOMAIN.TLD or NSx.SUBDOMAIN.YOURDOMAIN.TLD. Consequently the //Default email address// should correspond the same way (admin@yourdomain.tld), although this is not a standards requirement by RFCs. +
- +
-The DNSSEC settings are set to the largest-size keys as all other are very much discounted these days. You may set it higher, but only if OpenNIC recommends it+
- +
-I leave the transfer and query settings to be managed by each zone and leave them here blank / default. +
- +
-=== Forwarding and Transfers === +
-These should be the IP4 addresses of the OpenNIC Tier-2s. Normally you use Google's 8.8.8.8 here, but if you enter only that this name-server is NOT going to function. Also note - this is different from the settings of your VPS network, which SHOULD use Google's. +
-=== DNSSEC Initialization === +
-Access both screens, and set as you wish. Webmin fully automates the re-signing process, and the default 21 days is acceptable.+
  
-=== Module Config === +==== Logging ==== 
-Finally, click on the gear in the upper left corner, and change from the defaults:+Webmin provides access to several logging facilitieswith management for logging added for BIND and for Webmin.
  
-{{:opennic:setup:webminbind:base-005.png|Module Configuration - Part 1}} +{{:opennic:setup:webminbind:base-009.png|The standard UNIX logs }} 
-If you want to run under chroot set it here.\\  +Security starts with these logs, as nearly all attacks leave some clues in these logs.
-If reverse zone is REQUIRED leave it, otherwise set to NO.\\  +
-More to come later+
  
-{{:opennic:setup:webminbind:base-006.png|Module Configuration - Part 2}} +==== Conclusion ==== 
-More to come later+You may write your own scripts and use a tool such as Ansible to do more, better than what Webmin does. However, Webmin makes your instances much friendlier inside an environment without Information Technology professionals expert with GNU/Linux. On a factory floor, for example, Webmin is able to serve engineers, managers, production workers with much less training than full-featured but more complex tools.
  
-{{:opennic:setup:webminbind:base-007.png|Module Configuration - Part 3}} 
-More to come later 
  
-//NOTE: Editing of this page is suspended until information for a production server becomes available.// 
  
  
  • /wiki/data/attic/opennic/setup/webminbind/debian9u0webmin1u9base.1585226831.txt.gz
  • Last modified: 11 months ago
  • by fouroh-llc